A9K-8X100GE-TR

Model:

A9K-8X100GE-TR - Cisco ASR 9000 Series Line Card

Detail:

A9K-8X100GE-TR, Cisco ASR 9000 Series Line Card, 8x100GE QSFP28/Trident3 Chipset/No Fan & PSU

List Price:

US$ 1,366,363.00

Price:

US$61,850.00

Delivery:

1 Month Standard Lead Time
Need it sooner? Contact our sales team.

Tags:

100GE A9K QSFP28

Add to Cart

Specification

A9K-8X100GE-TR, Cisco ASR 9000 Series Line Card, 8x100GE QSFP28/Trident3 Chipset/No Fan & PSU Specification

A9K-8X100GE-TR Specifications
Chassis compatibility	Compatible with the Cisco ASR 9006, ASR 9010, ASR 9904, ASR 9906, ASR 9912 and ASR 9922 chassis
Port density	4-ports and 8 ports of 100 Gigabit Ethernet per line card
Ethernet	● 100-Gbps IEEE 802.3ba compliant ● 100 Gigabit Ethernet PHY monitoring ● IEEE 802.x flow control ● Full-duplex operation ● Per-port byte and packet counters for policy drops; oversubscription drops; Cyclic Redundancy Check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets
Performance	● 100-Gbps line-rate throughput per port
Options	Each line card is available as either a service edge optimized (enhanced QoS) or packet transport optimized (basic QoS) line card
Reliability and availability	Line card Online Insertion and Removal (OIR) support without system impact
Physical dimensions (H x W x D); weight	8-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg) 4-port 100 Gigabit Ethernet Line Card: 14.5 x 1.63 x 22.02 in.; 28 lb (est.) (368.3 mm x 41.4 mm x 559.3 mm; 12.7 kg)
Operating temperature	41 to 104°F (5 to 40°C)
Operating humidity (nominal) (relative humidity)	10 to 85%
Storage temperature	–40 to 158°F (–40 to 70°C)
Storage (relative humidity)	5 to 95% Note: Not to exceed 0.024 kg of water per kg of dry air
Operating altitude	–60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)
ETSI standards	Cisco ASR 9000 Series Routers are designed to meet: ● EN300 386: Telecommunications Network Equipment (EMC) ● ETSI 300 019 Storage Class 1.1 ● ETSI 300 019 Transportation Class 2.3 ● ETSI 300 019 Stationary Use Class 3.1 ● EN55022: Information Technology Equipment (Emissions) ● EN55024: Information Technology Equipment (Immunity) ● EN50082-1/EN-61000-6-1: Generic Immunity Standard
EMC standards	Cisco ASR 9000 Series Routers are designed to meet: ● FCC Class A ● ICES 003 Class A ● AS/NZS 3548 Class A ● CISPR 22 (EN55022) Class A ● VCCI Class A ● BSMI Class A ● IEC/EN 61000-3-2: Power Line Harmonics ● IEC/EN 61000-3-3: Voltage Fluctuations and Flicker
Immunity	Cisco ASR 9000 Series Routers are designed to meet: ● IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air) ● IEC/EN-61000-4-3: Radiated Immunity (10V/m) ● IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal) ● IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM) ● IEC/EN-61000-4-5: Signal Ports (1kV) ● IEC/EN-61000-4-5: Surge DC Port (1kV) ● IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms) ● IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m) ● IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations
Safety	Cisco ASR 9000 Series Routers are designed to meet: ● UL/CSA/IEC/EN 60950-1 ● IEC/EN 60825 Laser Safety ● ACA TS001 ● AS/NZS 60950 ● FDA: Code of Federal Regulations Laser Safety
Safety	Cisco ASR 9000 Series Routers are designed to meet: ● UL/CSA/IEC/EN 60950-1 ● IEC/EN 60825 Laser Safety ● ACA TS001 ● AS/NZS 60950 ● FDA: Code of Federal Regulations Laser Safety

Q&A

How does the A9K-8X100GE-TR compare to similar products?

Compared to similar products, the A9K-8X100GE-TR stands out for its 8 100GE ports and optimized design for OTN applications.

What are common troubleshooting steps for the A9K-8X100GE-TR?

Troubleshooting for the A9K-8X100GE-TR may involve checking cable connections, updating firmware, and monitoring port status.

How can the A9K-8X100GE-TR enhance network performance?

The A9K-8X100GE-TR improves network performance by offering high-speed connectivity and reliable data transmission for critical applications.

Support FAQ

Warranty terms

We promise that our products are original and genuine only. Brand-new products will be brand new and sealed to ensure no malfunctions, and second-hand products will undergo strict testing before shipment.

We offer a 1-year warranty for brand-new products and a 90-day warranty for second-hand products. During the warranty period, if the equipment you purchase has any operational defects, we will replace it for you (the warranty does not cover faults caused by human damage and improper use).

Once the product malfunctions, please notify us as soon as possible, and we will appreciate your detailed description or photos.

The warranty period is calculated from the date of receipt of the goods. For any issues or inquiries regarding your purchase, please feel free to contact us via WhatsApp (+86 152 7186 6615) or Skype/Email: sales@infdevice.com

Hot product

C9200L-24P-4G-E C9300-24P-A C9500-16X-A N9K-C93180YC-FX ISR4331/K9 C1000-48T-4G-L C8200-1N-4T C8300-1N1S-6T N9K-C93600CD-GX C9200L-48T-4G-E C9200-24T-E C9300-48T-A C9300L-24P-4X-E C8500L-8S4X